How to clean your printer!
There are 2 ways to clean your printer (please follow step by step):
1) Using a blue Smartsheet and double-sided tape :
- a. Fold a third of your Smartsheet - this will prevent the paper from going inside the engine - and flatten strongly.
- b. Apply tape on both sides like shown then place Smartsheet inside cartridge (!) make sure it is properly taped to the pressure plate (!)
- c. Insert cartridge - print a couple times to remove dust all around roller - then remove cartridge
- d. Remove sticky Smartsheet while holding the pressure plate
2) Using a photo paper :
- a. Fold a third of your sheet - this will prevent the paper from going inside the engine - and flatten strongly.
- b. Unpeel like shown, cut about half of the non-sticky side then place sheet inside the cartridge (!) make sure it is properly taped to the pressure plate (!)
- c. Insert cartridge - print a couple times to remove dust all around roller - then remove cartridge.
- d. Remove sticky sheet while holding the pressure plate
Note: PRYNT will send you free POPS if you send us the picture of your folded sheet, to help you get more paper!